Walls and trim collect fingerprints, cooking film, mystery smudges, and that dull gray haze that makes a room look tired even when you just cleaned it. This simple wall and woodwork cleaner cuts through the grime with pantry and laundry-room basics you probably already have. It is a practical old-school mix that handles a big job without fussing around with a half-dozen specialty bottles (because apparently every surface now needs its own opinion).
Making your own costs less than buying a ready-made wall cleaner. Using current Walmart pricing, this 1-gallon batch comes out to about $1.61 total, while a comparable premixed wall-cleaning product often costs several dollars for a much smaller bottle. You also control the scent, the strength of the final dilution, and whether you want to mix a full gallon at once or use it right away.
You only need 4 materials for this cleaner: ammonia, baking soda, vinegar, and water. The recipe makes 1 gallon, and a measuring cup plus a bucket or large container will handle the mixing without any extra gadgets.
- 🧰 Materials You'll Need
- 🔧 Tools/Equipment
- 🛠️ How to Make Wall and Woodwork Cleaner
- 🎨 Customization Ideas
- 🛠️ How to Use It
- 🛡️ Safety Information
- 📦 Storage
- 💸 Estimated Cost
- 🛍️ Need Help Finding Everything?
- ❓ Frequently Asked Questions about Wall and Woodwork Cleaner
- 📌 Love this Wall and Woodwork Cleaner? Pin it!
- 🖨️ Print-Friendly How-To: Wall and Woodwork Cleaner
Materials You’ll Need
- 1 cup ammonia
- 1/4 cup baking soda
- 1/2 cup vinegar
- 1 gallon water
Tools/Equipment
- Measuring cups
- Bucket or other large container
How to Make Wall and Woodwork Cleaner
- Measure 1 cup ammonia, 1/4 cup baking soda, and 1/2 cup vinegar.
- Add the measured ingredients to 1 gallon of water in a bucket or other large container.
- Stir the mixture until the baking soda dissolves and the cleaner looks evenly combined.
- Use the cleaner to wash walls and woodwork as needed.
Customization Ideas
- Mix the full gallon for large cleaning days when you plan to wash several walls, doors, baseboards, or painted trim in one round.
- Use the same formula as written for general wall and woodwork cleaning instead of adding fragrance or extra ingredients that can complicate rinsing.
- If you are tackling other surface-cleaning jobs around the house, pair this project with Magic Wall and Appliance Cleaner or No-Rinse Wall Cleaner for different cleaning needs.
How to Use It
- Use this cleaner for routine washing of walls and woodwork when built-up grime makes paint or trim look dingy.
- Apply with a soft cloth or sponge and work in manageable sections so you do not miss drips or streaks.
- For heavier buildup, wipe once to loosen the soil, then go back over the area with a freshly wrung cloth.
- Test in an inconspicuous spot first, especially on older finishes, glossy paint, stained trim, or anything with a delicate coating.
- If you need another wall-focused cleaner for a different finish or method, Wall Cleaner and Commercial Paper Wallcover Cleaner may be more useful matches.
Safety Information
Open a window or use good ventilation while mixing and cleaning, and keep this cleaner away from bleach or products that contain bleach. The Washington State Department of Health notes that mixing bleach with ammonia creates dangerous gases, which is reason enough to keep your cleaning bottles from getting creative together: Bleach Mixing Dangers.
- Do not mix this cleaner in a closed space.
- Keep it out of reach of children and pets.
- Avoid using it on any surface if you are unsure how that finish reacts to water-based cleaners.
- Never combine this with other cleaners unless you have confirmed the ingredients are compatible.
Storage
- Store any leftover cleaner in a clearly labeled container.
- Keep the container tightly closed between uses.
- Store it in a cool spot away from children, pets, and household chemicals you might accidentally mix with it later.
- If the mixture sits long enough for solids to settle, stir it again before using.
Estimated Cost
This is an estimated consumable cost for one 1-gallon batch, based on recent Walmart pricing. Actual prices vary by store and region.
- 1 cup ammonia from a 64-ounce bottle at $2.12: about $0.27
- 1/4 cup baking soda from a 1-pound box at $0.92: about $0.12
- 1/2 cup vinegar from a 128-ounce jug at $3.94: about $0.20
- 1 gallon water: not counted
Estimated total: $1.61
🛍️ Need Help Finding Everything?
- Clear ammonia, 64 fl oz
- Baking soda, 1 lb
- Distilled white vinegar, 128 fl oz
- Cleaning bucket
- Measuring cup set
Frequently Asked Questions about Wall and Woodwork Cleaner
Yes, but test it in a small hidden spot first. Painted walls can vary quite a bit by finish, age, and how well the paint cured, so a quick spot test saves you from learning the hard way.
That is exactly what this cleaner is meant for. Wipe with a soft cloth or sponge instead of flooding the trim, especially if the woodwork has older paint, stain, or varnish.
Usually, you can wipe the surface clean and let it dry, but if you notice residue on a glossy finish, go back over it with a clean damp cloth. That extra pass helps on surfaces that show every streak.
You can if you want smaller-batch access while cleaning, but the recipe itself makes a full gallon, so a bucket is easier for mixing. If you transfer any of it, label the bottle clearly and keep it away from other cleaners.
Not if you want to make this exact formula. Once you remove one of the main materials, you are making a different cleaner, not this wall and woodwork cleaner.
Store leftovers in a labeled container and use your judgment if it has been sitting for a while. If anything looks off, separates heavily, or no longer seems worth trusting, mix a fresh batch instead.
Never mix it with bleach or bleach-based cleaners. Since this recipe already contains ammonia, combining it with bleach can create dangerous gases, which is not the kind of cleaning shortcut anybody needs.
It can help with built-up film and grime, especially on washable surfaces. For very heavy grease, clean in small sections and plan on more than one wipe instead of trying to do the whole wall in one swipe.
No. A measuring cup and a bucket or other large container are enough for this batch.
📌 Love this Wall and Woodwork Cleaner? Pin it!

Keep this easy homemade cleaner handy for the next time fingerprints, scuffs, and dingy trim start taking over.
Did you try this project? Tell us where you used it and whether you cleaned walls, trim, baseboards, or all of the above.
🖨️ Print-Friendly How-To: Wall and Woodwork Cleaner

Wall and Woodwork Cleaner
Equipment
Materials
- 1 cup ammonia
- ¼ cup baking soda
- ½ cup vinegar
- 1 gallon water
Instructions
- Measure 1 cup ammonia, 1/4 cup baking soda, and 1/2 cup vinegar.
- Add the measured ingredients to 1 gallon of water in a bucket or other large container.
- Stir until the baking soda dissolves and the cleaner is evenly combined.
- Use the cleaner to wash walls and woodwork as needed.
- Label any leftover cleaner clearly.
- Store away from children, pets, and other household cleaners.
- Do not mix with bleach or bleach-based cleaners.
- Use with good ventilation.
- Estimated cost reflects consumable materials only and will vary by store and region.




