- This topic is empty.
- May 16, 2020 at 7:00 am #585303BigDodgeManParticipant
24” planting depth, 72” X 22” installed, creating three 15” X 15” display areas.
Serenity Botanical Tower aka Japanese Lantern Pagoda Trellis
2 4’x4′ posts
Lintels – cut to the same length and shape
5 Top lintels
Then attach them and add a “shelf” board to divide the tower and hang the lanterns.
Here’s a Pagoda Trellis/Arbor for you too
A – Posts 4 off, 75x75mm 2.4m long
B – Lintels 2 off, 140x35mm 1.5m long
C – End “rafters” 2 off, 140x35mm 1.2m long
D – Middle “rafters” 3 off, 140x35mm, 0.9m long (these will need to be trimmed to fit)
E – Braces 4 off 90x35mm, 0.3m long
F – Side braces 6 off, 95x35mm, 0.9m long
Hardware – use stainless steel screws/bolts to avoid corrosion.
4 off 75x75mm post sockets inserts
4 off 6x100mm coach bolts plus large washers
Assorted screws and nails
If you need more in depth instructions you can follow these plans.
If you arent familiar with metric measurements, here’s a converter for you to inches
Attachments:You must be logged in to view attached files.
- You must be logged in to reply to this topic.