- This topic has 1 reply, 1 voice, and was last updated June 21, 2017 at 10:58 am by .
Viewing 0 reply threads
- Posts
lehomy
the frame of the drawer system with ball bearings for the drawer slides installed.
iron for easy removal. you can see the t-nuts i used to bolt the bearings in place.
i used old skateboard bearings for the drawer slides. they were free and can handle a lot of weight.
I used 1×1 square tubing for the drawer slide.
the drawer and the top sheet installed.
the drawer with dividers and a lockable handle (the handle is meant for truck boxes)
right forward hatch where the second battery now resides.
the back left hatch. perfect size for a tent or sleeping bags.
i had to route out the edges of the top sheet where the wheel-wells curved up.
the truck box lock from the back.
the frame after using thompson’s water seal.
retrofitted a toyota tacoma with a bed and drawer system for climbing and adventuringphotos by TylerThompson
lehomy
Viewing 0 reply threads
- You must be logged in to reply to this topic.