1 small section of board- entirely dependent on how many jars you want to have.
1 Steel Hose Clamp (sz 3 1/126- 4" works great for pint & Quart Size Jars) If you're creating a small kitchen herb garden & prefer to use jelly jars, use 2 1/16 to 3" size
A couple Screws
First, get a section of board - the one pictured was actually pulled off an old wooden pallet. I wanted the edges to look a bit jagged, so I took a hammer and literally smashed the ends until they broke off.
This is the hard part, you'll need to puncture the steel clamp with a screw or nail in order to screw it in place into the board. Here's how I did mine, take a screw, place it on the steel band, pound with a hammer until you make a hole.
Once you've made a hole, screw it into the board where you want your jar to be. Repeat until you have place all of the bands on the board. Screw the board to the wall/ spot you wish to display the planter.
Next, Put your filled mason jar in place and carefully screw the band closed. Do not overtighten as you
That's it! You now have a beautiful rustic planter using recycled/reclaimed items that you more than likely already had on hand. This entire project cost us $2.12 - by using the steel clamps, the jars can be switched out by simply loosening the clamp.
This would make a wonderful compact kitchen herb garden using small jelly jars, or a super cute planter gift by filling the jars with potting soil and attaching seeds to each jar.
We'd love to hear your ideas as well, please feel free to share in the comments below . . . .